Product Manual

146 Clinitek Advantus Operator’s Guide
Moving table 8-75
Overview 8-71
Power cord 8-80
Push bar 8-78
Unpacking 8-71
Waste bin liner 8-79
L
Language
Select 8-88
Load Test 2-19
Loadlists 2-21
Troubleshoot 6-60
M
Memory 1-12
Microscopics
Add test results 2-26
Request report 2-25
Set headings 8-100
Moving Table
Install 8-75
Reinstall 5-41
Remove 5-39
P
Parts Included with Analyzer 8-72
Photodiode Pack 1-15
Pink Edge on Printer Paper 2-30
Power Cord
Install 8-80
Printer
Change paper 5-45
Connect external 8-80
Connection specifications G-142
Load paper 5-46
Orderable Supplies C-119
Remove cover 5-48
Remove paper roll 5-49
Replace 5-48
Set type 8-87
Printer Paper
Pink edge 2-30
Printing
Custom header 8-86
Set number of blank lines 8-86
Troubleshoot 6-58
, 6-59
Push Bar
Install 8-78
Lubricate 5-44
Reinstall 5-42
Remove 5-38
Troubleshoot 6-58
, 6-59
Q
Quality Control
Overview 4-33
Require 8-99
Test 4-34
Troubleshoot 4-36
R
Reagent Strip
Place 2-19
, 2-20
Remove jammed 6-55
Select 2-17
Set alternative 8-91
Use only Siemens Diagnostics
2-17
, 2-19, 2-24, 4-34, 8-82
Remove Jammed Reagent Strip 6-55
Reports
Troubleshoot 6-58
Restrict Access 8-103
Results
Add microscopic 2-26
Delete from memory 2-29
Edit in confirmatory report 2-25
Print 2-28
Recall 2-26
, 2-27
Resend 2-28
Table of results D-125
S
Sequence Number
Change starting 2-18
Serial Number 8-74
Set
Date 8-85
Time 8-85
Siemens Diagnostics
Reagent Strips 1-9
Specifications D-123
Specimen ID
Enable 8-102