User's Manual
Table Of Contents
- Before You Begin
- Basic Operating Instructions
- Making Calls – Basic Functions
- Making Calls – Enhanced Functions
- Accepting Calls
- Dialing/Making Calls
- En-Bloc Sending/Correcting Numbers
- Using a Caller List
- Speed Dialing
- Dialing from the Internal Directory
- Dialing from the Local Directory
- Voice Dialing
- Dialing from the Telephone Database (LDAP)
- Dialing from the LDAP Database
- Using Mailboxes
- Addressing Colleagues over the Speaker
- Talking to Your Colleague with Discreet Calling
- Automatic Connection Setup (Hotline)
- Reserving a Trunk
- Assigning a Station Number (Not for U.S.)
- Associated Dialing/Dialing Aid
- During a Call
- Using Second Call
- Accepting a Waiting Call (Camp-On)
- Preventing and Allowing Call Waiting (Automatic Camp-On)
- Activating/Deactivating the Call Waiting Tone
- Parking a Call
- Placing External Calls on Hold
- Conducting a Conference
- Ending a Conference (Initiator Only)
- Activating Tone Dialing/DTMF Suffix-Dialing
- Forwarding a Call After an Announcement
- Trunk Flash
- If You Cannot Reach a Destination
- Using Night Answer
- Saving Functions, Procedures, Wake-Up Calls, and Reminders
- Displaying and Assigning Call Charges
- Privacy/Security
- Turning Ringer Cutoff On and Off
- Activating/Deactivating Do Not Disturb
- Caller ID Suppression at the Called Party
- Monitoring a Room
- Identifying Anonymous Callers – Call Tracing (Not for U.S.)
- Locking the Telephone to Prevent Unauthorized Use
- Locking Another Telephone to Prevent Unauthorized Use
- Saving Your PIN
- Additional Features/Services
- Sending a Message
- Displaying the Number of Calls in Queue and Overload Indication
- Using Another Telephone Like Your Own for a Call
- Using Another Telephone Like Your Own for an Extended Period of Time (Mobility)
- Fax Details and Message on Answering Machine
- Resetting Services and Functions (System-Wide Cancellation for a Telephone)
- Activating Functions for Another Telephone
- Using System Functions from an External Location (DISA - Direct Inward System Access)
- Using Functions in ISDN via Code Dialing (Keypad Dialing)
- Operating Connected Computers or Other Programs/Telephone Data Service (HiPath3500/3550/3700/37...
- Communicating with PC Applications over a CSTA Interface
- Controlling Relays
- Sensors (HiPath3300/3350/3500/3550 Only)
- Radio Paging (Not for U.S.)
- Using Team Functions
- Station Number Directories and Lists
- Programming the Handset
- Testing the Telephone
- Different Displays (HiPath4000 Environment)
- Documentation
- Reference Guide
- Technical Data
- Index
- Overview of Functions/Codes (Alphabetical)
- Main Menu Overview
Step by Step
Privacy/Security
84
Privacy/Security
Turning Ringer Cutoff On and Off
You can activate the ringer cutoff function if you do not
want the receive any calls. Calls are only identified by
one ring signal, an indication on the display, and by a
flashing icon associated with a programmed FCN entry.
OK Select and confirm
[1]
.
or
OK
or
ON Enter the code for "Ringer cutoff on".
or
ON Enter the code for "Ringer cutoff off".
Activating/Deactivating Do Not Disturb
You can activate the do not disturb function if you do not
want the receive any calls. When do not disturb is acti-
vated, internal callers hear a busy signal and external
callers are rerouted to a telephone assigned for this pur-
pose (contact your service personnel).
OK Select and confirm.
or
OK
or
OM Enter the code for "DND on".
or
OM Enter the code for "DND off".
Ringer cutoff on?
[1] ”Different Displays (HiPath 4000 Environment)”
Page 136
Ringer cutoff off?
DND on?
DND off?
When you press the talk key, a special dial tone
(continuous whirring tone) reminds you that DND
is on.
Authorized internal callers can automatically
override the do not disturb function after five sec-
onds.