User's Manual
Table Of Contents
- Before You Begin
- Basic Operating Instructions
- Making Calls – Basic Functions
- Making Calls – Enhanced Functions
- Accepting Calls
- Dialing/Making Calls
- En-Bloc Sending/Correcting Numbers
- Using a Caller List
- Speed Dialing
- Dialing from the Internal Directory
- Dialing from the Local Directory
- Voice Dialing
- Dialing from the Telephone Database (LDAP)
- Dialing from the LDAP Database
- Using Mailboxes
- Addressing Colleagues over the Speaker
- Talking to Your Colleague with Discreet Calling
- Automatic Connection Setup (Hotline)
- Reserving a Trunk
- Assigning a Station Number (Not for U.S.)
- Associated Dialing/Dialing Aid
- During a Call
- Using Second Call
- Accepting a Waiting Call (Camp-On)
- Preventing and Allowing Call Waiting (Automatic Camp-On)
- Activating/Deactivating the Call Waiting Tone
- Parking a Call
- Placing External Calls on Hold
- Conducting a Conference
- Ending a Conference (Initiator Only)
- Activating Tone Dialing/DTMF Suffix-Dialing
- Forwarding a Call After an Announcement
- Trunk Flash
- If You Cannot Reach a Destination
- Using Night Answer
- Saving Functions, Procedures, Wake-Up Calls, and Reminders
- Displaying and Assigning Call Charges
- Privacy/Security
- Turning Ringer Cutoff On and Off
- Activating/Deactivating Do Not Disturb
- Caller ID Suppression at the Called Party
- Monitoring a Room
- Identifying Anonymous Callers – Call Tracing (Not for U.S.)
- Locking the Telephone to Prevent Unauthorized Use
- Locking Another Telephone to Prevent Unauthorized Use
- Saving Your PIN
- Additional Features/Services
- Sending a Message
- Displaying the Number of Calls in Queue and Overload Indication
- Using Another Telephone Like Your Own for a Call
- Using Another Telephone Like Your Own for an Extended Period of Time (Mobility)
- Fax Details and Message on Answering Machine
- Resetting Services and Functions (System-Wide Cancellation for a Telephone)
- Activating Functions for Another Telephone
- Using System Functions from an External Location (DISA - Direct Inward System Access)
- Using Functions in ISDN via Code Dialing (Keypad Dialing)
- Operating Connected Computers or Other Programs/Telephone Data Service (HiPath3500/3550/3700/37...
- Communicating with PC Applications over a CSTA Interface
- Controlling Relays
- Sensors (HiPath3300/3350/3500/3550 Only)
- Radio Paging (Not for U.S.)
- Using Team Functions
- Station Number Directories and Lists
- Programming the Handset
- Testing the Telephone
- Different Displays (HiPath4000 Environment)
- Documentation
- Reference Guide
- Technical Data
- Index
- Overview of Functions/Codes (Alphabetical)
- Main Menu Overview
Making Calls – Enhanced Functions
69
Step by Step
If You Cannot Reach a Destination
Call Waiting (Camp-On)
Precondition: You have dialed an internal number and
hear a busy signal. It is important that you reach the
called party.
Wait (approx. five seconds) until "Camp-on" appears on
the display and the busy tone is followed by the ring
tone.
The called party can then respond Page 60.
Override - Joining an Ongoing Call
This function is only available if it has been configured
(contact your service personnel).
Precondition: You have dialed an internal number and
hear a busy signal. It is important that you reach the
called party.
OK Select and confirm.
or
L Enter the code.
The called party and person to whom this party is talk-
ing hear an alerting tone every two seconds.
If the called party has a system telephone with display,
the following appears on the screen: "Preempt: (station
number or name)".
You can now start talking.
Camp-on
The called party can prevent automatic camp-on
Page 61.
If this feature is configured (contact your service
personnel), you immediately hear the ring tone
and the message "Camp-on" is displayed.
Override?