User's Manual
Table Of Contents
- Before You Begin
- Basic Operating Instructions
- Making Calls – Basic Functions
- Making Calls – Enhanced Functions
- Accepting Calls
- Dialing/Making Calls
- En-Bloc Sending/Correcting Numbers
- Using a Caller List
- Speed Dialing
- Dialing from the Internal Directory
- Dialing from the Local Directory
- Voice Dialing
- Dialing from the Telephone Database (LDAP)
- Dialing from the LDAP Database
- Using Mailboxes
- Addressing Colleagues over the Speaker
- Talking to Your Colleague with Discreet Calling
- Automatic Connection Setup (Hotline)
- Reserving a Trunk
- Assigning a Station Number (Not for U.S.)
- Associated Dialing/Dialing Aid
- During a Call
- Using Second Call
- Accepting a Waiting Call (Camp-On)
- Preventing and Allowing Call Waiting (Automatic Camp-On)
- Activating/Deactivating the Call Waiting Tone
- Parking a Call
- Placing External Calls on Hold
- Conducting a Conference
- Ending a Conference (Initiator Only)
- Activating Tone Dialing/DTMF Suffix-Dialing
- Forwarding a Call After an Announcement
- Trunk Flash
- If You Cannot Reach a Destination
- Using Night Answer
- Saving Functions, Procedures, Wake-Up Calls, and Reminders
- Displaying and Assigning Call Charges
- Privacy/Security
- Turning Ringer Cutoff On and Off
- Activating/Deactivating Do Not Disturb
- Caller ID Suppression at the Called Party
- Monitoring a Room
- Identifying Anonymous Callers – Call Tracing (Not for U.S.)
- Locking the Telephone to Prevent Unauthorized Use
- Locking Another Telephone to Prevent Unauthorized Use
- Saving Your PIN
- Additional Features/Services
- Sending a Message
- Displaying the Number of Calls in Queue and Overload Indication
- Using Another Telephone Like Your Own for a Call
- Using Another Telephone Like Your Own for an Extended Period of Time (Mobility)
- Fax Details and Message on Answering Machine
- Resetting Services and Functions (System-Wide Cancellation for a Telephone)
- Activating Functions for Another Telephone
- Using System Functions from an External Location (DISA - Direct Inward System Access)
- Using Functions in ISDN via Code Dialing (Keypad Dialing)
- Operating Connected Computers or Other Programs/Telephone Data Service (HiPath3500/3550/3700/37...
- Communicating with PC Applications over a CSTA Interface
- Controlling Relays
- Sensors (HiPath3300/3350/3500/3550 Only)
- Radio Paging (Not for U.S.)
- Using Team Functions
- Station Number Directories and Lists
- Programming the Handset
- Testing the Telephone
- Different Displays (HiPath4000 Environment)
- Documentation
- Reference Guide
- Technical Data
- Index
- Overview of Functions/Codes (Alphabetical)
- Main Menu Overview
Making Calls – Enhanced Functions
45
Step by Step
Answering Calls from the Entrance
Telephone and Opening the Door
If an entrance telephone has been programmed, you
can use your handset to speak to someone at the en-
trance telephone and activate a door opener.
If you have the proper authorization (contact your ser-
vice personnel), you can activate the door opener, en-
abling visitors to open the door themselves by entering
a five-digit code (for example, using a DTMF transmitter
or installed keypad).
Speaking to visitors via the entrance telephone:
Precondition: Your telephone rings.
Press the talk key within 30 seconds. You are connect-
ed to the entrance telephone immediately.
or
Press the talk key after more than thirty seconds.
Dial the entrance telephone number.
Opening the door from your telephone during a call
from the entrance telephone:
OK Confirm.
Opening the door from your telephone without
calling the entrance telephone:
FCN Press the display key.
OK Confirm.
OK Select and confirm.
or
L Enter the code.
Dial the entrance telephone number.
Opening the door with a code (at the door):
After ringing the bell, enter the five-digit code (using the
keypad or a DTMF transmitter). Depending on how the
door opener has been programmed, a doorbell call sig-
nal may or may not be forwarded.
Open door?
Program/Service
*
61=Open door?