User's Guide
Table Of Contents
- 1 About this Guide
- Contents
- 2 Overview of the HiPath Wireless Controller, Access Points and Convergence Software solution
- 2.1 Conventional wireless LANs
- 2.2 Elements of the HiPath Wireless Controller, Access Points and Convergence Software solution
- 2.3 HiPath Wireless Controller, Access Points and Convergence Software and your network
- 2.4 HiPath Wireless Controller product family
- 3 Configuring the HiPath Wireless Controller
- 3.1 System configuration overview
- 3.2 Logging on to the HiPath Wireless Controller
- 3.3 Working with the basic installation wizard
- 3.4 Configuring the HiPath Wireless Controller for the first time
- 3.4.1 Changing the administrator password
- 3.4.2 Applying product license keys
- 3.4.3 Setting up the data ports
- 3.4.4 Setting up Internal VLAN ID and multi-cast support
- 3.4.5 Setting up static routes
- 3.4.6 Setting up OSPF Routing
- 3.4.7 Configuring filtering at the interface level
- 3.4.8 Installing certificates on the HiPath Wireless Controller
- 3.4.9 Configuring the login authentication mode
- 3.4.10 Configuring network time
- 3.4.11 Configuring DNS servers for resolving host names of RADIUS servers
- 3.5 Additional ongoing operations of the system
- 4 Configuring the Wireless AP
- 4.1 Wireless AP overview
- 4.2 Discovery and registration overview
- 4.2.1 Wireless AP discovery
- 4.2.2 Registration after discovery
- 4.2.3 Understanding the Wireless AP LED status
- 4.2.4 Configuring the Wireless APs for the first time
- 4.2.5 Defining properties for the discovery process
- 4.2.6 Connecting the Wireless AP to a power source and initiating the discovery and registration process
- 4.3 Adding and registering a Wireless AP manually
- 4.4 Configuring Wireless AP settings
- 4.4.1 Modifying a Wireless AP’s status
- 4.4.2 Configuring a Wireless AP’s properties
- 4.4.3 AP properties tab configuration
- 4.4.4 Assigning Wireless AP radios to a VNS
- 4.4.5 Configuring Wireless AP radio properties
- 4.4.6 Setting up the Wireless AP using static configuration
- 4.4.7 Configuring Telnet/SSH Access
- 4.5 Configuring VLAN tags for Wireless APs
- 4.6 Modifying a Wireless AP’s properties based on a default AP configuration
- 4.7 Modifying the Wireless AP’s default setting using the Copy to Defaults feature
- 4.8 Configuring Wireless APs simultaneously
- 4.9 Configuring an AP as a sensor
- 4.10 Performing Wireless AP software maintenance
- 5 Virtual Network Services concepts
- 6 Configuring a VNS
- 6.1 High level VNS configuration flow
- 6.2 VNS global settings
- 6.2.1 Defining RADIUS servers and MAC address format
- 6.2.2 Configuring Dynamic Authorization Server support
- 6.2.3 Defining Wireless QoS Admission Control Thresholds
- 6.2.4 Defining Wireless QoS Flexible Client Access
- 6.2.5 Working with bandwidth control profiles
- 6.2.6 Configuring the Global Default Policy
- 6.2.7 Using the Sync Summary
- 6.3 Methods for configuring a VNS
- 6.4 Working with the VNS wizard to create a new VNS
- 6.5 Working with a GuestPortal VNS
- 6.6 Creating a VNS using the advanced method
- 6.7 Working with existing VNSs
- 6.8 Configuring a Topology
- 6.9 Configuring WLAN Services
- 6.9.1 Configuring a WLAN Service
- 6.9.2 Configuring privacy
- 6.9.3 Configuring accounting and authentication
- 6.9.3.1 Vendor Specific Attributes
- 6.9.3.2 Defining accounting methods for a WLAN Service
- 6.9.3.3 Configuring authentication for a WLAN Service
- 6.9.3.4 Defining the RADIUS server priority for RADIUS redundancy
- 6.9.3.5 Configuring assigned RADIUS servers
- 6.9.3.6 Defining a WLAN Service with no authentication
- 6.9.3.7 Configuring Captive Portal for internal or external authentication
- 6.9.4 Configuring the QoS policy
- 6.10 Configuring Policy
- 6.11 Working with a Wireless Distribution System
- 6.11.1 Simple WDS configuration
- 6.11.2 Wireless Repeater configuration
- 6.11.3 Wireless Bridge configuration
- 6.11.4 Examples of deployment
- 6.11.5 WDS WLAN Services
- 6.11.6 Key features of WDS
- 6.11.7 Deploying the WDS system
- 6.11.7.1 Connecting the WDS Wireless APs to the enterprise network for discovery and registration
- 6.11.7.2 Configuring the WDS Wireless APs through the HiPath Wireless Controller
- 6.11.7.3 Assigning the Satellite Wireless APs’ radios to the network WLAN Services
- 6.11.7.4 Connecting the WDS Wireless APs to the enterprise network for provisioning
- 6.11.7.5 Moving the WDS Wireless APs to the target location
- 6.11.8 Changing the pre-shared key in a WDS WLAN Service
- 7 Availability and session availability
- 8 Configuring Mobility
- 9 Working with third-party APs
- 10 Working with the Mitigator
- 11 Working with reports and displays
- 12 Performing system administration
- 13 Glossary
- A HiPath Wireless Controller’s physical description
- B Regulatory information
- C optiPoint WL2 Configuration
- D SpectraLink Wireless Telephones
- E Default GuestPortal source code
- 2 Overview of the HiPath Wireless Controller, Access Points and Convergence Software solution
About this Guide
hwc_pref.fm
Sicherheitshinweise
9034530-02, March 2010
8 HiPath Wireless Controller, Access Points and Convergence Software V7.11, User Guide
• Verwenden Sie ausschließlich Originalzubehör oder systemspezifisch
zugelassene Komponenten. Die Nichtbeachtung dieser Hinweise kann zur
Beschädigung der Ausrüstung oder zur Verletzung von Sicherheits- und
EMV-Vorschriften führen.
• Das System darf nur von autorisiertem Siemens-Servicepersonal gewartet
werden.
Warnhinweise
• Dieses Gerät darf nicht über Außenverdrahtung an ein LAN-Segment
angeschlossen werden.
• Stellen Sie sicher, dass alle Kabel korrekt geführt werden, um Zugbelastung
zu vermeiden.
• Sollte das Netzteil Anzeichen von Beschädigung aufweisen, tauschen Sie es
sofort aus.
• Trennen Sie alle Stromverbindungen, bevor Sie Arbeiten im Bereich der
Stromversorgung vornehmen, sofern dies nicht für eine Wartungsprozedur
anders verlangt wird.
• Gehen Sie vorsichtig vor, wenn Sie an Hotswap-fähigen HiPath Wireless
Controller-Komponenten (Stromversorgungen oder Lüftern) Servicearbeiten
durchführen. Rotierende Lüfter können ernsthafte Verletzungen
verursachen.
• Dieses Gerät ist möglicherweise über mehr als ein Netzkabel angeschlossen.
Um die Gefahr eines elektrischen Schlages zu vermeiden, sollten Sie vor
Durchführung von Servicearbeiten alle Netzkabel trennen. Falls eines der
Stromversorgungsmodule ausfällt, kann es ausgetauscht werden, ohne die
Stromversorgung zum HiPath Wireless Controller zu unterbrechen. Bei
dieser Prozedur ist jedoch mit Vorsicht vorzugehen. Das Modul kann extrem
heiß sein. Tragen Sie Handschuhe, um Verbrennungen zu vermeiden.
• Bei unsachgemäßem Austausch der Lithium-Batterie besteht
Explosionsgefahr. Die Lithium-Batterie darf nur durch identische oder vom
Händler empfohlene Typen ersetzt werden.
• Achten Sie bei Lithium-Batterien auf die ordnungsgemäße Entsorgung.
• Versuchen Sie niemals, ohne Hilfe schwere Gegenstände zu heben.
Vorsichtshinweise
• Überprüfen Sie die für die Ausrüstung festgelegte Nennspannung
(Bedienungsanleitung und Typenschild). Diese Ausrüstung arbeitet mit
Hochspannung, die mit der Gefahr eines elektrischen Schlages verbunden
ist. Gehen Sie mit großer Vorsicht vor, wenn Sie bei eingeschaltetem System
Hochspannungen messen oder Karten, Schalttafeln und Baugruppen warten.