User's Guide

Configuring the HiPath Wireless Controller
hwc_startup.fm
Configuring the HiPath Wireless Controller for the first time
9034530-02, March 2010
60 HiPath Wireless Controller, Access Points and Convergence Software V7.11, User Guide
• In the Address Range: from box, type the starting IP address of the
IP address range.
• In the Address Range: to box, type the ending IP address of the IP
address range.
h) Click the Exclusion(s) button to exclude IP addresses from allocation by
the DHCP Server. The DHCP Address Exclusion window opens.
The HiPath Wireless Controller automatically adds the IP addresses of
the Interfaces (Ports), and the default gateway to the exclusion list. You
can not remove these IP addresses from the exclusion list.
• Select the Range radio button. In the From box, type the starting IP
address of the IP address range that you want to exclude from the
DHCP allocation.
• In the To box, type the ending IP address of the IP address range that
you want to exclude from the DHCP allocation.
• To exclude a single address, select the Single Address radio button
and type the IP address in the adjacent box.
• In the Comment box, type any relevant comment. For example, you
can type the reason for which a certain IP address is excluded from
the DHCP allocation.
• Click on Add. The excluded IP addresses are displayed in the IP
Address(es) to exclude from DHCP Address Range box.
• To delete a IP Address from the exclusion list, select it in the IP
Address(es) to exclude from DHCP Range box, and then click
Delete.
• To save your changes, click OK.