User's Guide

Performing system administration
hwc_ongoing.fm
Performing Wireless AP client management
9034530-02, March 2010
452 HiPath Wireless Controller, Access Points and Convergence Software V7.11, User Guide
4. To add a new MAC address to the blacklist, in the MAC Address box type
the client’s MAC address.
5. Click Add. The client is displayed in the MAC Addresses list.
Note: You can use the Select All or Clear All buttons to help you select
multiple clients.
6. To save your changes, click Save.
To clear an address from the blacklist:
1. From the main menu, click Wireless AP Configuration. The Wireless AP
Configuration screen is displayed.
2. In the left pane, click Client Management. The Disassociate tab is
displayed.
3. Click the Blacklist tab.
4. To clear an address from the blacklist, select the corresponding checkbox in
the MAC Addresses list.
5. Click Remove Selected. The selected client is removed from the list.
Note: You can use the Select All or Clear All buttons to help you select
multiple clients.
6. To save your changes, click Save.