User's Guide

hwc_vnsconfiguration.fm
Configuring a VNS
Working with a Wireless Distribution System
9034530-02,
March 2010
HiPath Wireless Controller, Access Points and Convergence Software V7.11, User Guide 377
To assign the roles, preferred parent and backup parent:
a) From the radio b/g drop-down list of the Root Wireless APs — Ardal,
Arthur, Athens and Auberon, click Parent.
b) From the radio a drop-down list of the Root Wireless APs — Ardal, Arthur,
Athens and Auberon, click Parent.
c) From the radio a and radio b/g drop-down list of other Wireless APs, click
the roles according to Table 35.
d) From the Preferred Parent drop-down list of other Wireless APs, click the
parents according to Table 35.
e) From the Backup Parent drop-down list of other Wireless APs, click the
backup parents according to Table 35.
9. To save your changes, click Save.
6.11.7.3 Assigning the Satellite Wireless APs’ radios to the
network WLAN Services
You must assign the Satellite Wireless APs’s radios to the network WLAN
Services.
Note: Network WLAN Services are the typical WLAN Services on which the
Wireless APs service the client devices: Routed, Bridge Traffic Locally at
HWC, and Bridge Traffic Locally at AP. For more information, see Section 6.2,
“VNS global settings”, on page 245.