User's Guide

Configuring a VNS
hwc_vnsconfiguration.fm
Configuring WLAN Services
9034530-02, March 2010
318 HiPath Wireless Controller, Access Points and Convergence Software V7.11, User Guide
c) To save your changes, click Save.
5. If you select Dynamic Keys, click Save to save your changes.
6. If you select WPA, do the following:
a) To enable WPA v1 encryption, select WPA v.1. Then, click one of the
following encryption types from the Encryption drop-down list:
•Auto – The AP will advertise both TKIP and CCMP (Counter Mode
with Cipher Block Chaining Message Authentication Code Protocol)
for WPAv1. CCMP is an IEEE 802.11i encryption protocol that uses
the encryption cipher AES (Advanced Encryption Standard). Auto is
the default.
• TKIP only – The AP will advertise TKIP as an available encryption
protocol for WPAv1. It will not advertise CCMP.
b) To enable WPA v2-type encryption, select WPA v.2. Then, click one of the
following encryption types from the Encryption drop-down list:
•Auto – If you click Auto, the Wireless AP advertises both TKIP and
CCMP (counter mode with cipher block chaining message
authentication code protocol). CCMP is an IEEE 802.11i encryption
protocol that uses the encryption cipher AES (Advanced Encryption
Standard). Auto is the default.
• AES only – If you click AES, the Wireless AP advertises CCMP as an
available encryption protocol. It will not advertise TKIP.
• available encryption protocol. It will not advertise TKIP.
c) From the Key Management Options, click one of the following key
management options: