User's Guide

Configuring a VNS
hwc_vnsconfiguration.fm
Working with a GuestPortal VNS
9034530-02, March 2010
292 HiPath Wireless Controller, Access Points and Convergence Software V7.11, User Guide
18. Configure the radio assignments:
• In the AP Default Settings section, select the radios of the AP default
settings profile that you want to broadcast the VNS.
• In the AP Selection section, select the group of APs that will broadcast
the VNS:
• all radios – Click to assign all of the APs’ radios.
• radio 1 – Click to assign only the APs’ Radio 1.
• radio 2– Click to assign only the APs’ Radio 2.
• local APs - all radios – Click to assign only the local APs.
• local APs - radio 1 – Click to assign only the local APs’ Radio 1.
• local APs - radio 2 – Click to assign only the local APs’ Radio 2.
• foreign APs - all radios – Click to assign only the foreign APs.
• foreign APs - radio 1 – Click to assign only the foreign APs’ Radio 1.
• foreign APs - radio 2 – Click to assign only the foreign APs’ Radio 2.
• If applicable, select the WMM checkbox. WMM (Wi-Fi Multimedia), if
enabled on an individual VNS, provides multimedia enhancements that
improve the user experience for audio, video, and voice applications.
WMM is part of the 802.11e standard for QoS. If enabled, the AP will
accept WMM client associations, and will classify and prioritize the
downlink traffic for all WMM clients. WMM clients will also classify and
prioritize the uplink traffic.
19. Click Next. The Summary screen is displayed.