User's Guide
Table Of Contents
- 1 About this Guide
- Contents
- 2 Overview of the HiPath Wireless Controller, Access Points and Convergence Software solution
- 2.1 Conventional wireless LANs
- 2.2 Elements of the HiPath Wireless Controller, Access Points and Convergence Software solution
- 2.3 HiPath Wireless Controller, Access Points and Convergence Software and your network
- 2.4 HiPath Wireless Controller product family
- 3 Configuring the HiPath Wireless Controller
- 3.1 System configuration overview
- 3.2 Logging on to the HiPath Wireless Controller
- 3.3 Working with the basic installation wizard
- 3.4 Configuring the HiPath Wireless Controller for the first time
- 3.4.1 Changing the administrator password
- 3.4.2 Applying product license keys
- 3.4.3 Setting up the data ports
- 3.4.4 Setting up Internal VLAN ID and multi-cast support
- 3.4.5 Setting up static routes
- 3.4.6 Setting up OSPF Routing
- 3.4.7 Configuring filtering at the interface level
- 3.4.8 Installing certificates on the HiPath Wireless Controller
- 3.4.9 Configuring the login authentication mode
- 3.4.10 Configuring network time
- 3.4.11 Configuring DNS servers for resolving host names of RADIUS servers
- 3.5 Additional ongoing operations of the system
- 4 Configuring the Wireless AP
- 4.1 Wireless AP overview
- 4.2 Discovery and registration overview
- 4.2.1 Wireless AP discovery
- 4.2.2 Registration after discovery
- 4.2.3 Understanding the Wireless AP LED status
- 4.2.4 Configuring the Wireless APs for the first time
- 4.2.5 Defining properties for the discovery process
- 4.2.6 Connecting the Wireless AP to a power source and initiating the discovery and registration process
- 4.3 Adding and registering a Wireless AP manually
- 4.4 Configuring Wireless AP settings
- 4.4.1 Modifying a Wireless AP’s status
- 4.4.2 Configuring a Wireless AP’s properties
- 4.4.3 AP properties tab configuration
- 4.4.4 Assigning Wireless AP radios to a VNS
- 4.4.5 Configuring Wireless AP radio properties
- 4.4.6 Setting up the Wireless AP using static configuration
- 4.4.7 Configuring Telnet/SSH Access
- 4.5 Configuring VLAN tags for Wireless APs
- 4.6 Modifying a Wireless AP’s properties based on a default AP configuration
- 4.7 Modifying the Wireless AP’s default setting using the Copy to Defaults feature
- 4.8 Configuring Wireless APs simultaneously
- 4.9 Configuring an AP as a sensor
- 4.10 Performing Wireless AP software maintenance
- 5 Virtual Network Services concepts
- 6 Configuring a VNS
- 6.1 High level VNS configuration flow
- 6.2 VNS global settings
- 6.2.1 Defining RADIUS servers and MAC address format
- 6.2.2 Configuring Dynamic Authorization Server support
- 6.2.3 Defining Wireless QoS Admission Control Thresholds
- 6.2.4 Defining Wireless QoS Flexible Client Access
- 6.2.5 Working with bandwidth control profiles
- 6.2.6 Configuring the Global Default Policy
- 6.2.7 Using the Sync Summary
- 6.3 Methods for configuring a VNS
- 6.4 Working with the VNS wizard to create a new VNS
- 6.5 Working with a GuestPortal VNS
- 6.6 Creating a VNS using the advanced method
- 6.7 Working with existing VNSs
- 6.8 Configuring a Topology
- 6.9 Configuring WLAN Services
- 6.9.1 Configuring a WLAN Service
- 6.9.2 Configuring privacy
- 6.9.3 Configuring accounting and authentication
- 6.9.3.1 Vendor Specific Attributes
- 6.9.3.2 Defining accounting methods for a WLAN Service
- 6.9.3.3 Configuring authentication for a WLAN Service
- 6.9.3.4 Defining the RADIUS server priority for RADIUS redundancy
- 6.9.3.5 Configuring assigned RADIUS servers
- 6.9.3.6 Defining a WLAN Service with no authentication
- 6.9.3.7 Configuring Captive Portal for internal or external authentication
- 6.9.4 Configuring the QoS policy
- 6.10 Configuring Policy
- 6.11 Working with a Wireless Distribution System
- 6.11.1 Simple WDS configuration
- 6.11.2 Wireless Repeater configuration
- 6.11.3 Wireless Bridge configuration
- 6.11.4 Examples of deployment
- 6.11.5 WDS WLAN Services
- 6.11.6 Key features of WDS
- 6.11.7 Deploying the WDS system
- 6.11.7.1 Connecting the WDS Wireless APs to the enterprise network for discovery and registration
- 6.11.7.2 Configuring the WDS Wireless APs through the HiPath Wireless Controller
- 6.11.7.3 Assigning the Satellite Wireless APs’ radios to the network WLAN Services
- 6.11.7.4 Connecting the WDS Wireless APs to the enterprise network for provisioning
- 6.11.7.5 Moving the WDS Wireless APs to the target location
- 6.11.8 Changing the pre-shared key in a WDS WLAN Service
- 7 Availability and session availability
- 8 Configuring Mobility
- 9 Working with third-party APs
- 10 Working with the Mitigator
- 11 Working with reports and displays
- 12 Performing system administration
- 13 Glossary
- A HiPath Wireless Controller’s physical description
- B Regulatory information
- C optiPoint WL2 Configuration
- D SpectraLink Wireless Telephones
- E Default GuestPortal source code
- 2 Overview of the HiPath Wireless Controller, Access Points and Convergence Software solution
Overview of the HiPath Wireless Controller, Access Points and Convergence Software solution
hwc_intro.fm
HiPath Wireless Controller, Access Points and Convergence Software and your network
9034530-02, March 2010
26 HiPath Wireless Controller, Access Points and Convergence Software V7.11, User Guide
RADIUS Server system can be set up for certain standard attributes, such as
filter ID, and for the Vendor Specific Attributes (VSAs). In addition, Radius
Disconnect (RFC3576) which permits dynamic adjustment of user policy
(user disconnect) is supported.
• DHCP Server (Dynamic Host Configuration Protocol) (RFC2131) – A server
that assigns IP addresses, gateways, and subnet masks dynamically. IP
address assignment for clients can be done by the DHCP server internal to
the HiPath Wireless Controller, or by existing servers using DHCP relay. It is
also used by the Wireless APs to discover the location of the HiPath Wireless
Controller during the initial registration process. For SLP, DHCP should have
Option 78 enabled. Option 78 specifies the location of one or more SLP
Directory Agents.
• Service Location Protocol (SLP) (SLP RFC2608) – Client applications are
User Agents and services that are advertised by a Service Agent. In larger
installations, a Directory Agent collects information from Service Agents and
creates a central repository. The Siemens solution relies on registering
“siemens” as an SLP Service Agent.
• Domain Name Server (DNS) – A server used as an alternate mechanism (if
present on the enterprise network) for the automatic discovery process.
HiPath Wireless Controller, Access Points and Convergence Software relies
on the DNS for Layer 3 deployments and for static configuration of Wireless
APs. The controller can be registered in DNS, to provide DNS assisted AP
discovery. In addition, DNS can also be used for resolving RADIUS server
hostnames.
• Web Authentication Server – A server that can be used for external Captive
Portal and external authentication. The HiPath Wireless Controller has an
internal Captive portal presentation page, which allows Web authentication
(Web redirection) to take place without the need for an external Captive Portal
server.
• RADIUS Accounting Server (Remote Access Dial-In User Service)
(RFC2866) – A server that is required if RADIUS Accounting is enabled.
• Simple Network Management Protocol (SNMP) – A Manager Server that
is required if forwarding SNMP messages is enabled.
• Network infrastructure – The Ethernet switches and routers must be
configured to allow routing between the various services noted above.
Routing must also be enabled between multiple HiPath Wireless Controllers
for the following features to operate successfully:
• Availability
• Mobility
• Mitigator for detection of rogue access points
Some features also require the definition of static routes.