User's Guide

Configuring the Wireless AP
hwc_apstartup.fm
Discovery and registration overview
9034530-02, March 2010
108 HiPath Wireless Controller, Access Points and Convergence Software V7.11, User Guide
LEDs L3 and L4
LEDs L3 and L4 indicate the detailed state of the Wireless AP. LEDs L1, L3, and
L4 work in conjunction to indicate the general and detailed state of the 802.11n
AP.
Table 12 provides a composite view of the three LEDs and the corresponding
state of the 802.11n AP:
L1 HiPath Wireless 802.11n AP’s general state
Blink Green Initialization and discovery in progress via Ethernet
Blink Amber Initialization and discovery in progress via WDS
Blink Red Error during initialization and discovery
Solid Green Discovery finished via Ethernet
Solid Amber Discovery finished via WDS
Table 11 LED L1 and Wireless AP’s status
L3 L4 L1 HiPath Wireless 802.11n AP’s detailed state
Off
Off Blink Green
Initialization: Power-on self test (POST)
Blink Green
Blink Green
Blink Red
Solid Green
Blink Green
Blink Red
Blink Amber
Blink
Green
Off
Blink Green
/ Orange
Network discovery: 802.1x authentication
Blink Red Failed 802.1x authentication
Blink Green Blink Green
/ Amber
Network discovery: DHCP
Blink Red Default IP address
Solid Green Blink Green
/ Amber
Network discovery: HWC discovery / connect
Blink Red Discovery failed
Table 12 LEDs L3, L4 and L1, and Wireless 802.11n AP’s detailed state