User's Guide

hwc_apstartup.fm
Configuring the Wireless AP
Discovery and registration overview
9034530-02,
March 2010
HiPath Wireless Controller, Access Points and Convergence Software V7.11, User Guide 107
4.2.3.3 HiPath Wireless 802.11n AP LED status
Figure 10 depicts the location of the LEDs on the HiPath Wireless 802.11n.
Figure 10 HiPath Wireless 802.11n AP LEDs
LEDs L1, L3, and L4 work in conjunction to indicate the general, high-level, and
detailed state respectively. LED L2 indicates the status of the Ethernet port.
After initialization and discovery is completed and the 802.11n AP is connected
to the HiPath Wireless Controller, LEDs L3 and L4 indicate the state of the
corresponding radio — L3 for Radio 5 GHz, and L4 for Radio 2.4 GHz.
LEDs color codes
The 802.11n AP LEDs indicate “normal-operation”, “warning/special”, or “failed”
state of the Wireless AP in the following color codes:
Table 10 LED color codes
LED L1
LED L1 indicates the general state of the 802.11n AP:
LED Color/State Description
Green Normal operational state.
Orange/amber Warning or special state, such as WDS.
Blinking AP state, such as initialization or discovery, is in progress.
Red Error state
Steady color AP state is stable;process is completed. For example, initialization
is finished or discovery completed.