User's Guide

hwc_apstartup.fm
Configuring the Wireless AP
Discovery and registration overview
9034530-02,
March 2010
HiPath Wireless Controller, Access Points and Convergence Software V7.11, User Guide 101
Center LED
The Center LED indicates the general status of the Wireless AP:
Left LED
The Left LED indicates the high-level state of the Wireless AP during the
initialization and discovery process:
Left and Right LEDs
The Right LED indicates the detailed state during the initialization and discovery
processes:
Center LED HiPath Wireless AP’s status
Blinking Green Initialization and discovery in progress via Ethernet link
Blinking Orange/Amber Initialization and discovery in progress via WDS link
Blinking Red Error during initialization/discovery process
Solid Red Irrecoverable error
Solid Green Discovery finished via Ethernet link
Solid Orange/Amber Discovery finished via WDS link
Table 3 Center LED and Wireless AP’s status
Left LED HiPath Wireless AP’s high-level state
Off Initialization
Blinking Green Network Discovery
Solid Green Connecting with the HiPath Wireless Controller
Table 4 Left LED and Wireless AP’s high-level state
Left LED Right LED HiPath Wireless AP’s detailed state
Off
Off Initialization: Power-on self-test (POST)
Blinking Green Initialization: Random delay
Solid Green Initialization: Vulnerable period
Blinking Green
Off Network Discovery: 802.1X authentication
Blinking Green Network Discovery: Attempting to obtain IP
address via DHCP
Solid Green Network Discovery: Discovered HiPath
Wireless Controller
Solid Green
Off Connecting to HiPath Wireless Controller:
Attempting to register with the HiPath Wireless
Controller
Blinking Green Connecting to HiPath Wireless Controller:
Upgrading to higher version
Solid Green Connecting to HiPath Wireless Controller:
Configuring itself
Table 5 Left and Right LEDs and Wireless AP’s detailed state