User's Manual

Configuring the Wireless AP
hwc_apstartup.fm
Configuring Wireless AP settings
A31003-W1050-U100-2-7619
, March 2008
94 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
3. Modify the Wireless AP’s information:
•Name – Type a unique name for the Wireless AP that identifies the AP.
The default value is the Wireless AP’s serial number.
• Description – Type comments for the Wireless AP.
•Role – Click the role for the AP, either Access Point or Sensor. Once the
AP is configured as a Sensor, the AP no longer performs RF services and
is no longer managed by the HiPath Wireless Controller. For more
information, see Section 4.9, “Configuring an AP as a sensor”, on page
141.
4. To save your changes, click Save.