User's Manual

hwc_apstartup.fm
Configuring the Wireless AP
Configuring Wireless AP settings
A31003-W1050-U100-2-7619,
March 2008
HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide 93
• Country – Click the country of operation. This option is only available with
some licenses.
The following on the AP Properties tab are view only:
•Serial # – Displays a unique identifier that is assigned during the
manufacturing process.
•Port – Displays the Ethernet port of the HiPath Wireless Controller the
Wireless AP is connected to.
• Hardware Version – Displays the current version of the Wireless AP
hardware.
• Application Version – Displays the current version of the Wireless AP
software.
•Status:
• Approved – Indicates that the Wireless AP has received its binding
key from the HiPath Wireless Controller after the discovery process.
•Pending – Indicates that the Wireless AP has not yet successfully
been approved for access with the secure controller.
You can modify the status of a Wireless AP on the Access Approval
page. For more information, see Section 4.5.1, “Modifying a Wireless
AP’s status”, on page 88
• Active Clients – Displays the number of wireless devices currently active
on the Wireless AP.
4. To save your changes, click Save.
To modify a Wireless AP’s properties as a sensor:
1. From the main menu, click Wireless AP Configuration. The HiPath
Wireless AP page is displayed.
2. In the Wireless AP list, click the Wireless AP whose properties you want to
modify. The AP Properties tab displays Wireless AP information.