User's Manual

hwc_apstartup.fm
Configuring the Wireless AP
Configuring Wireless AP settings
A31003-W1050-U100-2-7619,
March 2008
HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide 87
To add and register a Wireless AP manually:
1. From the main menu, click Wireless AP Configuration. The HiPath
Wireless AP page is displayed.
2. Click Add Wireless AP. The Add Wireless AP page is displayed.
3. In the Serial # box, type the unique identifier.
4. In the Hardware Type drop-down list, click the hardware type of the Wireless
AP.
5. In the Name box, type a unique name for the Wireless AP.
6. In the Role drop-down list, click the Wireless AP’s role — Access Point or
Sensor.
7. In the Description box, type descriptive comments for the Wireless AP.
8. Click Add Wireless AP. The Wireless AP is added and registered.
When a Wireless AP is added manually, it is added to the controller database
only and does not get assigned.
9. Click Close.
4.5 Configuring Wireless AP settings
Wireless APs are added with default settings, which you can adjust and configure
according to your network requirements. In addition, you can modify the
properties and the settings for each radio on the Wireless AP.