User's Manual

hwc_apstartup.fm
Configuring the Wireless AP
Configuring the Wireless APs for the first time
A31003-W1050-U100-2-7619,
March 2008
HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide 85
3. In the Security Mode section, select one of the following:
• Allow all Wireless APs to connect
• Allow only approved Wireless APs to connect
The Allow all Wireless APs to connect option is selected by default. For
more information, see Section 4.3.1, “Security mode”, on page 83.
4. In the Discovery Timers section, type the discovery timer values in the
following boxes:
• Number of retries
• Delay between retries
The number of retries is limited to 255 in a five minutes discovery period. The
default number of retries is 3, and the default delay between retries is 1
second.
5. To save your changes, click Save.
Once the discovery parameters are defined, you can connect the Wireless AP to
a power source.