User's Manual

Configuring the Wireless AP
hwc_apstartup.fm
Wireless AP overview
A31003-W1050-U100-2-7619
, March 2008
70 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
4.1.6.1 Enabling/Disabling telnet access and setting up new
Telnet Access Password via the controller’s user interface
You can enable/disable the telnet access, and set up a new Telnet Access
Password via the controller's user interface. The Wireless AP must successfully
discover the controller to pick up this configuration.
Note: The new telnet access password that you set up over the controller’s user
interface overrides the default telnet access password.
Enabling/disabling telnet access via the controller’s user interface
To enable/disable telnet access:
1. From the main menu, click Wireless AP Configuration. The Wireless AP
Configuration screen appears.
2. In the Wireless AP list, click the Wireless AP for which you want to enable/
disable telnet.
3. From the Telnet Access drop-down menu, select Enable to enable the telnet
access, or select Disable to disable the telnet access.
4. Click Save.