User's Manual

Configuring the HiPath Wireless Controller
hwc_startup.fm
Performing the first time setup of the HiPath Wireless Controller
A31003-W1050-U100-2-7619
, March 2008
40 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
10. Type the following information:
•Hostname – Specifies the name of the HiPath Wireless Controller
•Domain – Specifies the IP domain name of the enterprise network
• Management IP Address – Specifies the new IP address for the HiPath
Wireless Controller’s management port. Change this as appropriate for
the enterprise network.
• Subnet mask – Specifies the appropriate subnet mask for the IP address
to separate the network portion from the host portion of the address
(typically 255.255.255.0)
• Management Gateway – Specifies the default gateway of the network
• Primary DNS – Specifies the primary DNS server used by the network
• Secondary DNS – Specifies the secondary DNS server used by the
network
11. To save your changes, click OK.
Note: The Web connection between the computer and the HiPath Wireless
Controller is now lost. The IP addresses are now set to the network you defined.