User's Manual

Virtual Network configuration
hwc_vnsconfiguration.fm
Wireless Distribution System
A31003-W1050-U100-2-7619
, March 2008
246 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
10. To save your changes, click Save.
6.17.7.3 Assigning the Satellite Wireless APs’ radios to the
network VNSs
You must assign the Satellite Wireless APs’s radios to the network VNSs.
Note: The network VNSs are the usual VNSs on which the Wireless APs service
the client devices. Routed, Bridge Traffic Locally at HWC and Bridge Traffic
Locally at AP VNSs are the network VNSs. For more information, see Section
6.1, “VNS Types”, on page 163.
To assign the Satellite Wireless APs’ radios to the network VNS:
1. From the main menu, click Virtual Network Configuration. The Virtual
Network Configuration page is displayed.
2. In the left pane Virtual Networks list, click the network VNS that you want to
assign to the radios of Satellite Wireless APs.
3. Click the RF tab.