User's Manual

hwc_vnsconfiguration.fm
Virtual Network configuration
Wireless Distribution System
A31003-W1050-U100-2-7619,
March 2008
HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide 241
To configure the WDS Wireless APs through the HiPath Wireless Controller:
Note: You must identify and mark the Preferred Parents, Backup Parents and the
Child Wireless APs in the proposed WDS topology before starting the
configuration process.
1. From the main menu, click Virtual Network Configuration. The Virtual
Network Configuration page is displayed.
2. In the left pane, type the WDS VNS name in the Add subnet box.
3. Click Add subnet. The name is displayed in the virtual networks list and the
Topology tab is displayed.
4. From the VNS Mode drop-down list, click WDS. The WDS Topology tab is
displayed.