User's Manual
hwc_vnsconfiguration.fm
Virtual Network configuration
Bridging traffic locally
A31003-W1050-U100-2-7619,
March 2008
HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide 227
• Enable U-APSD – Select to enable the Unscheduled Automatic Power
Save Delivery (U-APSD) feature. This feature can be used by mobile
devices to efficiently sustain one or more real-time streams while being in
power-save mode. This feature works in conjunction with WMM and/or
802.11e, and it is automatically disabled if both WMM and 802.11e are
disabled.
• Use Global Admission Control for Voice (VO) – Select to enable
admission control for Voice. With admission control, clients are forced to
request admission in order to use the high priority access categories in
both downlink and uplink direction. Admission control protects admitted
traffic against new bandwidth demands.
• Use Global Admission Control for Video (VI) – This feature is only
available If admission control is enabled for Voice. Select to enable
admission control for Video. With admission control, clients are forced to
request admission in order to use the high priority access categories in
both downlink and uplink direction. Admission control protects admitted
traffic against new bandwidth demands.
Note: The HiPath Wireless 802.11n AP does not support the Advanced
Wireless QoS features.
8. To save your changes, click Save.
6.16 Bridging traffic locally
A VNS must first be setup before traffic can be bridged locally. For more
information, see Chapter 5, “Virtual Network Services”.
To bridge traffic locally:
1. From the main menu, click Virtual Network Configuration. The Virtual
Network Configuration page is displayed.
2. In the left pane, type a name that will identify the new VNS in the Add subnet
box.
3. Click Add subnet. The name is displayed in the Virtual Networks list. The
Topology tab is displayed.
4. In the VNS Mode drop-down list, click Bridge Traffic Locally at AP to enable
branch office mode.
5. To define the VLAN Setting, select one of the following:
•Tagged
• Untagged