User's Manual

hwc_vnsconfiguration.fm
Virtual Network configuration
Configuring the QoS policy on a VNS
A31003-W1050-U100-2-7619,
March 2008
HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide 225
4. From the Wireless QoS list, do the following:
•Legacy – Select if your VNS will support legacy devices that use
SpectraLink Voice Protocol (SVP) for prioritizing voice traffic. If selected,
the Turbo Voice option is displayed.
•WMM – Select to enable the AP to accept WMM client associations, and
classify and prioritize the downlink traffic for all WMM clients. Note that
WMM clients will also classify and prioritize the uplink traffic. WMM is part
of the 802.11e standard for QoS. If selected, the Turbo Voice and the
Advanced Wireless QoS options are displayed.
• 802.11e – Select to enable the AP to accept WMM client associations,
and classify and prioritize the downlink traffic for all 802.11e clients. The
802.11e clients will also classify and prioritize the uplink traffic. If selected,
the Turbo Voice and the Advanced Wireless QoS options are
displayed:
• Turbo Voice – Select to enable all downlink traffic that is classified to the
Voice (VO) AC and belongs to that VNS to be transmitted by the AP via a
queue called Turbo Voice (TVO) instead of the normal Voice (VO) queue.
When Turbo Voice is enabled together with WMM or 802.11e, the WMM