User's Manual

Virtual Network configuration
hwc_vnsconfiguration.fm
Configuring the QoS policy on a VNS
A31003-W1050-U100-2-7619
, March 2008
224 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
Step 3 – Defining the DSCP and service class classifications:
All 64 DSCP code-points are supported. The IETF defined codes are listed by
name and code. Un-defined codes are listed by code. The following is the default
DSCP service class classification:
Step 4 – Enable Priority override:
• click the applicable service class and implicitly desired UP
• Updates UP in user packet
• Updates UP for WASSP frame (if field exists) sent by AP
• Select the desired DSCP
• Updates DSCP for WASSP frames sent by AP
• Does not change DSCP in user packet
Step 5 – Configure the advanced wireless QoS:
• Enable the Unscheduled Automatic Power Save Delivery (U-APSD)
feature
• Works in conjunction with WMM and/or 802.11e, and it is automatically
disabled if both WMM and 802.11e are disabled
Step 5 – Configure Global Admission Control:
• Enable admission control. Admission control protects admitted traffic against
new bandwidth demands.
• Available for Voice and Video.
To configure QoS Policy on a VNS:
1. From the main menu, click Virtual Network Configuration. The Virtual
Network Configuration page is displayed.
2. In the left pane Virtual Networks list, click the VNS you want to configure for
QoS.
3. Click the QoS Policy tab.
DSCP SC/UP DSCP SC/UP DSCP SC/UP
CS0/DE 2/0 AF11 2/0 AF33 4/4
CS1 0/1 AF12 2/0 AF41 5/5
CS2 1/2 AF13 2/0 AF42 5/5
CS3 3/3 AF21 3/3 AF43 5/5
CS4 4/4 AF22 3/3 EF 6/6
CS5 5/5 AF23 3/3 Others 0/1
CS6 6/6 AF31 4/4
CS7 7/7 AF32 4/4