User's Manual

Virtual Network configuration
hwc_vnsconfiguration.fm
Configuring privacy for a VNS
A31003-W1050-U100-2-7619
, March 2008
216 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
Opportunistic Keying & Pre-auth
Opportunistic Keying and Pre-auth options is meant for the device clients that
support both the authentication processes. For example, the Microsoft-operated
device clients support opportunistic keying by default, but they can be configured
to support pre-authentication too.
To set up Wi-Fi Protected Access privacy (WPA) for an AAA VNS:
1. From the main menu, click Virtual Network Configuration. The Virtual
Network Configuration page is displayed.
2. In the left pane Virtual Networks list, click the AAA VNS you want to
configure privacy by WPA-PSK for a Captive Portal. The Topology tab is
displayed.
3. Click the Privacy tab.
4. Select WPA.
5. To enable WPA v1 encryption, select WPA v.1.
• From the Encryption drop-down list, select one of the following
encryption types: