User's Manual

Virtual Network configuration
hwc_vnsconfiguration.fm
Configuring privacy for a VNS
A31003-W1050-U100-2-7619
, March 2008
212 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
• If WPA v.1 is disabled, the Wireless 802.11n AP will advertise the
encryption cipher AES (Advanced Encryption Standard).
To set up static WEP privacy for an AAA VNS:
1. From the main menu, click Virtual Network Configuration. The Virtual
Network Configuration page is displayed.
2. In the left pane Virtual Networks list, click the AAA VNS you want to
configure privacy by WPA-PSK for a Captive Portal. The Topology tab is
displayed.
3. Click the Privacy tab.
4. Select Static Keys (WEP).
5. From the WEP Key Length drop-down list, click the WEP encryption key
length:
• 64-bit
• 128-bit
• 152-bit
6. Select one of the following input methods:
• Input Hex – If you select Input Hex, type the WEP key input in the WEP
Key box. The key is generated automatically, based on the input.