User's Manual

hwc_vnsconfiguration.fm
Virtual Network configuration
Configuring privacy for a VNS
A31003-W1050-U100-2-7619,
March 2008
HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide 209
5. From the WEP Key Length drop-down list, click the WEP encryption key
length:
• 64-bit
• 128-bit
• 152-bit
6. Select one of the following input methods:
• Input Hex – If you select Input Hex, type the WEP key input in the WEP
Key box. The key is generated automatically, based on the input.
• Input String – If you select Input String, type the secret WEP key string
used for encrypting and decrypting in the WEP Key String box. The WEP
Key box is automatically filled by the corresponding Hex code.
7. To save your changes, click Save.
To configure privacy by WPA-PSK for a Captive Portal VNS:
1. From the main menu, click Virtual Network Configuration. The Virtual
Network Configuration page is displayed.
2. In the left pane Virtual Networks list, click the VNS you want to configure
privacy by WPA-PSK for a Captive Portal. The Topology tab is displayed.
3. Click the Privacy tab.