User's Manual

hwc_vnsconfiguration.fm
Virtual Network configuration
Enabling multicast for a VNS
A31003-W1050-U100-2-7619,
March 2008
HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide 207
4. To enable the multicast function, select Enable Multicast Support.
5. Define the multicast groups by selecting one of the radio buttons:
•IP Group – Type the IP address range.
• Defined groups – Click from the drop-down list.
6. Click Add. The group is added to the list above.
7. To enable the wireless multicast replication for this group, select the
corresponding Wireless Replication checkbox.
8. To modify the priority of the multicast groups, click the group row, and then
click the Up or Down buttons.
A Deny All rule is automatically added as the last rule, IP = *.*.*.* and the
Wireless Replication checkbox is not selected. This rule ensures that all
other traffic is dropped.
9. To save your changes, click Save.
Note: The multicast packet size should not exceed 1450 bytes.