User's Manual

Virtual Network configuration
hwc_vnsconfiguration.fm
Configuring filtering rules for a VNS
A31003-W1050-U100-2-7619
, March 2008
194 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
4. In the Filter ID Values box, type the name of a group that you want to define
specific filtering rules for to control network access.
5. Click the corresponding Add button. The filter ID value is displayed in the list.
These filter ID values will appear in the Filter ID list on the Filtering tab.
These filter ID values must match those set up for the filter ID attribute in the
RADIUS server.
6. If applicable, repeat steps 4 and 5 to add additional filtering ID values.
7. In the VNS Group Name box, type the name of a VNS group you want to
create and define within the selected parent VNS.
8. Click the corresponding Add button. The Group Name will appear as a child
of the parent VNS in the left pane Virtual Networks list.
9. To your changes, click Save.
6.9 Configuring filtering rules for a VNS
The next step in configuring a VNS is to configure the filtering rules for a VNS.
In an AAA VNS, a non-authenticated filter is unnecessary because users have
already been authenticated. When authentication is returned, the filter ID group
filters are applied. For AAA, a VNS can have a sub-group with Login-LAT-group