User's Manual

hwc_vnsconfiguration.fm
Virtual Network configuration
Authentication for a VNS
A31003-W1050-U100-2-7619,
March 2008
HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide 183
10. To view a summary of the RADIUS configuration, click View Summary. The
RADIUS summary page is displayed.
11. To save your changes, click Save.
6.6.2.2 Configuring Captive Portal for internal or external
authentication
There are three Captive Portal options:
• No Captive Portal Support
• Internal Captive Portal – Define the parameters of the internal Captive
Portal page displayed by the HiPath Wireless Controller, and the
authentication request from the HiPath Wireless Controller to the RADIUS
server.
• External Captive Portal – Define the parameters of the external Captive
Portal page displayed by an external server. The authentication can be
carried out by an external authentication server or by the HiPath Wireless
Controller request to a RADIUS server.
For more information, see Section 6.6.2.2, “To configure the Captive Portal
settings for internal Captive Portal:”, on page 184 or Section 6.6.2.2, “To configure
the Captive Portal Settings for external Captive Portal:”, on page 185.