User's Manual

hwc_vnsintro.fm
Virtual Network Services
Setting up a new VNS
A31003-W1050-U100-2-7619,
March 2008
HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide 161
This precautionary step is highly recommended in order to avoid an error,
later, when the HiPath Wireless Controller attempts to communicate with the
RADIUS server.
6. To save your changes, click Save.
5.9 Setting up a new VNS
Now that you are familiar with the VNS concepts, you can now set up a new VNS.
Setting up a new VNS involves the following general steps:
• Step one – Create a VNS name
• Step two – Define the topology parameters
• Step three – Configure the VNS
For information on setting up a new VNS, see Chapter 6, “Virtual Network
configuration”.