User's Manual

Virtual Network Services
hwc_vnsintro.fm
VNS global settings
A31003-W1050-U100-2-7619
, March 2008
158 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
3. To define a RADIUS server available on the network, do the following:
• In the Server Name box, type a name.
• In the Server Address box, type the IP address.
• In the Shared Secret box, type the password that is required in both
directions. This password is used to validate the connection between
controller and the RADIUS server.
4. In order to proofread your password before saving the configuration, click
Unmask. The password is displayed. To mask the password, click Mask.
This precautionary step is highly recommended in order to avoid an error,
later, when the HiPath Wireless Controller attempts to communicate with the
RADIUS server.
5. To add the server to the list, click Add.
6. To remove a server, click the server in the list, and then click Remove
selected server.
7. To save your changes, click Save.