Manualshelf

User's Manual

ManualsBrandsSiemens Communications ManualsElectronicsHiPath Wireless AP, Altitude 450, Altitude 451
141142143144145146147148149150
Configuring the Wireless AP
hwc_apstartup.fm
Performing Wireless AP software maintenance
A31003-W1050-U100-2-7619
, March 2008
146 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
6. In the list of registered Wireless APs, select the checkbox for each Wireless
AP to be upgraded with the selected software image.
7. Click Apply AP image version. The selected software image is displayed in
the Upgrade To column of the list.
8. To save the software upgrade strategy to be run later, click Save for later.
9. To run the software upgrade immediately, click Upgrade Now. The selected
Wireless AP reboots, and the new software version is loaded.
Note: The Always upgrade AP to default image checkbox on the AP
Software Maintenance tab overrides the Controlled Upgrade settings.