User's Manual

Configuring the Wireless AP
hwc_apstartup.fm
Performing Wireless AP software maintenance
A31003-W1050-U100-2-7619
, March 2008
142 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
• TFTP server IP address
• Path to sensor image
To configure Sensor Management values for the HiPath Wireless
Controller:
1. From the main menu, click Wireless AP Configuration. The HiPath
Wireless AP page is displayed.
2. In the left pane, click Sensor Management. The Wireless AP Sensor
Management page is displayed.
3. Type the following:
• TFTP Server – The IP of the TFTP server the AP is to retrieve the sensor
image file from.
• Path to Image – The filename and location of the sensor image.
4. To save your changes, click Save.
4.10 Performing Wireless AP software maintenance
Periodically, the software used by the Wireless APs is altered for reasons of
upgrade or security. The new version of the AP software is installed from the
HiPath Wireless Controller.