User's Manual

Configuring the Wireless AP
hwc_apstartup.fm
Configuring Wireless APs simultaneously
A31003-W1050-U100-2-7619
, March 2008
140 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
To configure Wireless APs simultaneously:
1. From the main menu, click Wireless AP Configuration. The HiPath
Wireless AP page is displayed.
2. In the left pane, click AP Multi-edit.
3. Do the following:
• In the Hardware Types list, click one or more Wireless AP hardware
types.
• In the Wireless APs list, click one or more Wireless APs to edit. To click
multiple Wireless APs, click the APs from the list while pressing the CTRL
key.
Note: When using multi-edit configuration, any box or option that is not
explicitly modified will not be changed by the update.
The Wireless APs shown in the Wireless APs list can be from any version of
the software. Attributes that are common between software versions are set
on all Wireless APs. Attributes that are not common, are only sent to the AP
versions to which the attributes apply. Attempting to set an attribute that does
not apply for an AP will not abort the multi-edit operation.
4. Modify the configuration of the selected Wireless APs: