User's Manual

hwc_apstartup.fm
Configuring the Wireless AP
Configuring Wireless AP settings
A31003-W1050-U100-2-7619,
March 2008
HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide 129
• Common Configuration – Configure common configuration, such as VNS
assignments and static configuration options for all Wireless APs including,
the Wireless AP 2610/2620, the Wireless 802.11n AP 3610/3620, and the
HiPath Wireless Outdoor AP 2650/2660.
• Standard AP Defaults – Configure the default Wireless AP settings for only
the Wireless AP 2610/2620 and HiPath Wireless Outdoor AP 2650/2660.
•11n AP Defaults – Configure the default Wireless AP settings for only the
Wireless 802.11n AP 3610/3620.
To configure the default AP settings:
1. From the main menu, click Wireless AP Configuration. The HiPath
Wireless AP page is displayed.
2. In the left pane, click AP Default Settings.
3. Modify the following Wireless AP default settings as required:
• Static Configuration
• VNS Assignments
• AP Properties
• Radio Settings