User's Manual

hwc_apstartup.fm
Configuring the Wireless AP
Configuring Wireless AP settings
A31003-W1050-U100-2-7619,
March 2008
HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide 125
The credentials are deleted and the Wireless AP settings are updated.
Note: If you attempt to delete the 802.1x credentials of a Wireless AP that
currently does not have an active session with the HiPath Wireless Controller,
the credentials are only deleted after the Wireless AP connects with the
HiPath Wireless Controller.
4.5.6 Setting up 802.1x authentication for Wireless
APs using Multi-edit
In addition to configuring Wireless APs individually, you can also configure 802.1x
authentication for multiple Wireless APs simultaneously by using the AP 802.1x
Multi-edit feature.
To configure 802.1x PEAP authentication using Multi-edit:
1. From the main menu, click Wireless AP Configuration. The HiPath
Wireless AP page is displayed.
2. In the left pane, click AP 802.1x Multi-edit.
3. In the Wireless APs list, click one or more APs to edit. To select multiple APs,
click the APs from the list while pressing the CTRL key.