User's Manual

hwc_apstartup.fm
Configuring the Wireless AP
Configuring Wireless AP settings
A31003-W1050-U100-2-7619,
March 2008
HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide 115
while the HiPath Wireless Controller is in the central office. The Wireless APs
require the capability to interact in both the local site network and the central
network. To achieve this model, a static configuration is used.
Note: If a Wireless AP with a statically configured IP address (without a statically
configured Wireless Controller Search List) cannot register with the HiPath
Wireless Controller within the specified number of retries, the Wireless AP will
use SLP, DNS, and SLP multicast as a backup mechanism.
To set up a Wireless AP using static configuration:
1. From the main menu, click Wireless AP Configuration. The HiPath
Wireless AP page is displayed.
2. Click the appropriate Wireless AP in the list.
3. Click the Static Configuration tab.
4. Select one of the VLAN settings for the Wireless AP:
Note: The Wireless 802.11n AP does not support VLAN tagging.
• Tagged - VLAN ID – Select if you want to assign this AP to a specific
VLAN and type the value in the box.