User's Manual

ManualsBrandsSiemens Communications ManualsElectronicsHiPath Wireless AP, Altitude 450, Altitude 451

111

112

113

114

115

116

117

118

119

120

Configuring the Wireless AP

hwc_apstartup.fm

Configuring Wireless AP settings

A31003-W1050-U100-2-7619

, March 2008

114 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide

• Max Operational Rate – Click the maximum data rate that clients can

operate at while associated with the AP: 6, 9, 12, 18, 24, 36, 48, or 54

Mbps. If necessary, the Max Operational Rate choices adjust

automatically to be higher or equal to the Max Basic Rate.

Note: Radio a channels 100 to 140 occupy the 5470-5725 MHz band in the

regulatory domains of the European Union and European Union free trade

countries.

Radio B/G Channels 12 and 13 are not available in North America. Radio B/

G channel 14 is only available in Japan.

• No of Retries for Background BK – Click the number of retries for the

Background transmission queue. The default value is adaptive (multi-

rate). The recommended setting is adaptive (multi-rate).

• No of Retries for Best Effort BE – Click the number of retries for the

Best Effort transmission queue. The default value is adaptive (multi-

rate). The recommended setting is adaptive (multi-rate).

• No of Retries for Video VI – Click the number of retries for the Video

transmission queue. The default value is adaptive (multi-rate). The

recommended setting is adaptive (multi-rate).

• No of Retries for Voice VO – Click the number of retries for the Voice

transmission queue. The default value is adaptive (multi-rate). The

recommended setting is adaptive (multi-rate).

• No of Retries for Turbo Voice TVO – Click the number of retries for the

Turbo Voice transmission queue. The default value is adaptive (multi-

rate). The recommended setting is adaptive (multi-rate).

12. To save your changes, click Save.

4.5.4 Setting up the Wireless AP using static

configuration

The Wireless AP static configuration feature provides the HiPath Wireless

Controller, Access Points and Convergence Software solution with the capability

for a network with either a central office or a branch office model. The static

configuration settings assist in the setup of branch office support. These settings

are not dependent of branch topology, but instead can be employed at any time

if required. In the branch office model, Wireless APs are installed in remote sites,