User's Manual

hwc_pref.fm
About this Guide
Documentation feedback
A31003-W1050-U100-2-7619,
March 2008
HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide 11
For example: Type https://<hwc-address>[:mgmt-port>]
• The following notes are used to draw your attention to additional information:
Note: Notes identify useful information, such as reminders, tips, or other ways to
perform a task.
Caution: Cautionary notes identify essential information, which if ignored can
adversely affect the operation of your equipment or software.
Warning: Warning notes identify essential information, which if ignored can lead
to personal injury or harm.
1.4 Documentation feedback
If you have any problems using this document, please contact your next level of
support:
• Siemens employees should contact the interactive Customer Engagement
Team (i-CET).
• Customers should contact the Siemens Customer Support Center.
When you call, please have the following information ready. This will help us to
identify the document that you are referring to.
• Title: HiPath Wireless Controller, Access Points and Convergence Software
V5 R1 C20/C2400 User Guide
• Part Number: A31003-W1050-U100-2-7619
1.5 Safety Information
Dangers
• Replace the power cable immediately if it shows any sign of damage.
• Replace any damaged safety equipment (covers, labels and protective
cables) immediately.
• Use only original accessories or components approved for the system.
Failure to observe these instructions may damage the equipment or even
violate safety and EMC regulations.