User's Manual

hwc_ongoing.fm
Performing system maintenance
Performing HiPath Wireless Controller software maintenance
A31003-W1050-U100-2-7619,
March 2008
HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide 339
•User ID – The user ID used to log in to the FTP server.
• Password – The corresponding password for the user ID.
• Confirm – The corresponding password for the user ID to confirm it was
typed correctly.
•Directory – The directory on the server in which the backup file that is to
be retrieved is stored.
• Filename – The name of the image file to retrieve.
5. Click Download. The backup is downloaded and added to the Available
Backups list.
To delete a backup available for restore:
1. From the main menu, click Wireless Controller Configuration. The
Wireless Controller Configuration page is displayed.
2. From the left pane, click Software Maintenance. The System Maintenance
page is displayed.
3. Click the Restore tab.
4. To delete a backup from the list, click the backup in the Available Backups
list you want to delete.
5. Click Delete.
6. Review the restore settings in the dialog box that is displayed. If correct, click
OK to confirm the deletion. The Software Maintenance window is displayed,
providing the status and results of the deletion.
11.4.5 Upgrading a HiPath Wireless Controller using
SFTP
You can upload an image file to the HiPath Wireless Controller using Secure FTP
(SFTP). The HiPath Wireless Controller supports any SFTP client.
Note: You must enable management traffic before you try to connect with a SFTP
client. Specify the exact image path for the corresponding SW package (see
directory information below). Otherwise, the HiPath Wireless Controller cannot
locate them for SW upgrades/updates.