User's Manual

hwc_ongoing.fm
Performing system maintenance
Performing HiPath Wireless Controller software maintenance
A31003-W1050-U100-2-7619,
March 2008
HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide 335
4. To upload a backup, type the following:
•FTP Server – The IP of the FTP server to where the backup will be copied
to.
•User ID – The user ID used to log in to the FTP server.
• Password – The corresponding password for the user ID.
• Confirm – The corresponding password for the user ID to confirm it was
typed correctly.
•Directory – The directory on the server where the image file will be
stored.
5. In the Filename drop-down list, click the backup you want to upload.
6. Click Upload. The Software Maintenance window is displayed, providing
the status and results of the backup.
11.4.3.2 Scheduling a backup
When you schedule a backup, you can either chose to save the back to an FTP
server or have the scheduled backup saved on your system.
Note: If you do not specify an FTP server in the Schedule Backups window
when you define the backup schedule, the backup is added to the Available
Backups list on the Backup tab.
To schedule a backup:
1. From the main menu, click Wireless Controller Configuration. The
Wireless Controller Configuration page is displayed.
2. From the left pane, click Software Maintenance. The HWC Software tab is
displayed.
3. Click the Backup tab.
4. Click Schedule Backup. The Schedule Backups page is displayed.