User's Manual

Performing system maintenance
hwc_ongoing.fm
Performing HiPath Wireless Controller software maintenance
A31003-W1050-U100-2-7619
, March 2008
330 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
a) Click the Upgrade now button.
b) Review the upgrade settings in the dialog box that is displayed. If
correct, click OK to confirm the upgrade. Once you confirm the
upgrade, all sessions are closed. The Software maintenance window
is displayed, providing the status of the upgrade. The previous
software is uninstalled automatically. The new software is installed.
The HiPath Wireless Controller reboots automatically. The database
is updated and migrated.
To perform a remote upgrade of HiPath Wireless Controller software using
a downloaded image file from an the FTP server:
1. From the main menu, click Wireless Controller Configuration. The
Wireless Controller Configuration page is displayed.
2. From the left pane, click Software Maintenance. The HWC Software tab is
displayed.
3. Select Remote, and then type the following:
• FTP Server – The IP address of the FTP server to retrieve the image file
from.
• User ID – The user ID used to log in to the FTP server.
• Password – The corresponding password for the user ID.