User's Manual

hwc_ongoing.fm
Performing system maintenance
Performing HiPath Wireless Controller software maintenance
A31003-W1050-U100-2-7619,
March 2008
HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide 329
5. If applicable, backup the current system image:
• To save the backup image locally, select the Flash option, and then type
a file name for the backup image in the Filename box. The filename must
end with the .tgz extension.
• To save the backup image on a remote FTP server, select the Remote
option, and then type the following:
• FTP Server – The IP of the FTP server that will store the image file.
• User ID – The user ID used to log in to the FTP server.
• Password – The corresponding password for the user ID.
• Confirm – The corresponding password for the user ID, to confirm it
was typed correctly.
•Directory – The directory on the server in which the image file is to
be stored.
•Filename – The name of the image file. The filename must end with
the .tgz extension.
6. If applicable, clear the Backup system image to option if you do not want to
save a backup image of your current system.
Caution: You should always backup your current system during the upgrade
process. Having a backup image of your system provides you the option of
restoring your system to its previous configuration, if needed.
7. Do one of the following:
• To schedule a backup, select the Schedule upgrade for option.
a) Use the Month, Day, Hour, and Minute drop-down lists to schedule
the upgrade.
b) Click Schedule upgrade.
c) Review the upgrade settings in the dialog box that is displayed. If
correct, click OK to confirm the upgrade. Once you confirm the
upgrade, the HWC Software tab fields become grayed out.
Note: A scheduled upgrade is not a recurring event. The HiPath Wireless
Controller only allows one scheduled upgrade to be scheduled at a time.
• To perform the upgrade now, select the Upgrade now option.