User's Manual

hwc_ongoing.fm
Performing system maintenance
Performing HiPath Wireless Controller software maintenance
A31003-W1050-U100-2-7619,
March 2008
HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide 321
11.4.1 Working with a flash memory card
The HiPath Wireless Controller C2400 supports the use of a flash memory card
to store your system’s image files.
Note: To use the flash memory card capabilities of the HiPath Wireless Controller
C2400, you must remove the cover of the flash memory card from the HiPath
Wireless Controller and then insert a flash memory card. A flash memory card is
not shipped with your HiPath Wireless Controller 2400. For more information, see
the HiPath Wireless Controller, Access Points and Convergence Software
Controller C2400 Installation Instructions.
When working with a flash memory card, use the HiPath Wireless Assistant to:
• Mount the flash memory card – By mounting the flash memory card, you
make the flash memory card that has been inserted into the HiPath Wireless
Controller 2400 available for use.
• Unmount the flash memory card – By unmounting the flash memory card,
you make the flash memory card that has been inserted into the HiPath
Wireless Controller 2400 unavailable for use.
Caution: You must always unmount the flash memory card via the HiPath
Wireless Assistant before removing it from the HiPath Wireless Controller.
Failure to do so may corrupt the files on the flash card.
• Delete files stored on the flash memory card – By deleting files stored on
the flash memory card, you make additional space on the flash memory card
available.
To mount a flash memory card:
1. From the main menu, click Wireless Controller Configuration. The
Wireless Controller Configuration page is displayed.
2. From the left pane, click Flash. The Flash Memory page is displayed.