User's Manual

Performing system maintenance
hwc_ongoing.fm
Performing HiPath Wireless Controller software maintenance
A31003-W1050-U100-2-7619
, March 2008
320 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
To force an immediate system shutdown:
1. From the main menu, click Wireless Controller Configuration. The
Wireless Controller Configuration page is displayed.
2. To shut down the system, including associated Wireless APs, select the
appropriate shut down option:
• Halt system: reboot
• Halt system: reset database to factory default and reboot – Restores
all aspects of the system configuration to the initial settings. However, the
Management IP address and license key are preserved. This permits the
user to remain connected through the Management interface.
• Halt system: reset to factory default and reboot – Resets the entire
system configuration to the factory shipping state. The Management IP
address reverts to 192.168.10.1 and the license key is removed.
• Halt system – The system enters the halted state, which stops all
functional services and the application. To restart the system, the power
to the system must be reset.
3. Click Apply Now. The system is immediately halted.
11.4 Performing HiPath Wireless Controller software maintenance
Software Maintenance can include the following administrator tasks:
• Working with a flash memory card
• Upgrading HiPath Wireless Controller software
• Backing up the HiPath Wireless Controller database
• Restoring the HiPath Wireless Controller database
• Maintaining the HiPath Wireless Controller product license keys
Syslog Event Controller, Access Points and Convergence
Software Event
LOG_CRIT Critical
LOG_ERR Major
LOG_WARNING Minor
LOG_INFO Information
LOG_DEBUG Trace
Table 28 Syslog and Controller, Access Points and Convergence Software
event log mapping