User's Manual

Performing system maintenance
hwc_ongoing.fm
Performing system maintenance tasks
A31003-W1050-U100-2-7619
, March 2008
318 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
To change the log levels:
1. From the main menu, click Wireless Controller Configuration. The
Wireless Controller Configuration page is displayed.
2. In the System Log Level section, from the Wireless Controller Log Level
drop-down list, select the least severe log level for the Controller that you
want to receive: Information, Minor, Major, Critical. For example, if you
select Minor, you receive all Minor, Major and Critical messages. If you
select Major you receive all Major and Critical messages. The default is
Information.
3. Click Apply.
4. From the Wireless AP Log Level drop-down list, select the least severe log
level for the AP that you want to receive: Information, Minor, Major, Critical.
The default is Critical.
5. Click Apply.
To set a poll interval:
1. From the main menu, click Wireless Controller Configuration. The
Wireless Controller Configuration page is displayed.
2. In the Health Checking section, in the Poll Timer box, type the time interval
(in seconds) for the HiPath Wireless Controller to check that each Wireless
AP is connected. The default is 60 seconds.