User's Manual

hwc_ongoing.fm
Performing system maintenance
Resetting the Wireless APs to their factory default settings
A31003-W1050-U100-2-7619,
March 2008
HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide 313
3. Click the Blacklist tab.
4. To clear an address from the blacklist, select the corresponding checkbox in
the MAC Addresses list.
5. Click Remove Selected. The selected client is removed from the list.
Note: You can use the Select All or Clear All buttons to help you select
multiple clients.
6. To save your changes, click Save.
To import a list of MAC addresses for the blacklist:
1. From the main menu, click Wireless AP Configuration. The Wireless AP
Configuration page is displayed.
2. From the left pane, click Client Management. The Disassociate tab is
displayed.
3. Click the Blacklist tab.
4. Click Browse and navigate to the file of MAC addresses you want to import
and add to the blacklist.
5. Click the file, and then click Import. The list of MAC addresses is imported.
To export a list of MAC addresses for the blacklist:
1. From the main menu, click Wireless AP Configuration. The Wireless AP
Configuration page is displayed.
2. From the left pane, click Client Management. The Disassociate tab is
displayed.
3. Click the Blacklist tab.
4. To export the current blacklist, use the browser’s save option to save the file
as a text (.txt) file. It is recommend that a descriptive file name is used.
5. Click Export. The saved blacklist file is exported.
11.2 Resetting the Wireless APs to their factory default settings
You can reset the HiPath Wireless AP and the HiPath Wireless Outdoor AP to
their factory default settings.