User's Manual

Performing system maintenance
hwc_ongoing.fm
Performing Wireless AP client management
A31003-W1050-U100-2-7619
, March 2008
312 HiPath Wireless Controller, Access Points and Convergence Software V5 R1 , C20/C2400 User Guide
To blacklist a wireless device client using its MAC address:
1. From the main menu, click Wireless AP Configuration. The Wireless AP
Configuration page is displayed.
2. From the left pane, click Client Management. The Disassociate tab is
displayed.
3. Click the Blacklist tab.
4. To add a new MAC address to the blacklist, in the MAC Address box type the
client’s MAC address.
5. Click Add. The client is displayed in the MAC Addresses list.
Note: You can use the Select All or Clear All buttons to help you select
multiple clients.
6. To save your changes, click Save.
To clear an address from the blacklist:
1. From the main menu, click Wireless AP Configuration. The Wireless AP
Configuration page is displayed.
2. From the left pane, click Client Management. The Disassociate tab is
displayed.